Find your MAC address for your phone at Settings -> About Phone -> Status.
Then enable Bluetooth discovery scan on the phone. Ensure Bluetooth tethering is turned on, on your phone, under “Settings: Connections: Mobile Hotspot and Tethering”.
#File buddy 7 android#
Next, you may want to connect your Pwnagotchi to your Android phone. You might need to disable and re-enable Internet Connection Sharing and repeat the above steps periodically. Internet Connection Sharing on Windows can be a bit unstable between reboots. You should now be able to connect to your unit using SSH either from a Command Prompt or an application like PuTTY: ssh # default password: raspberry It may notify you it is changing the IP address of already connected devices, in which case re-enter the Pi’s IP address as above and check the gateway address is also set correctly. If it has a list below that, to choose from, choose the Pi’s connection. Tick the box to allow other network users to connect through this computer connection. Right-click the main network connection you use for your computer. Use the following IP address: 10.0.0.1, subnet mask 255.255.255.0, gateway 10.0.0.1, DNS server 1.1.1.1, 8.8.8.8.Ĭlose those two windows and go back to the network connections window. Right-click the Raspberry Pi, something like Ethernet 2, go to properties, click Internet Protocol Version 4, and click Properties. Now right-click the network icon on the bottom right taskbar. If your Pwnagotchi has already been booted up at least once before, after a few seconds, you will see a new Ethernet interface on your host computer. Start by connecting the micro-USB cable to the data port of your Pwnagotchi on the Pi, then connect the other end of that cable to your PC.
#File buddy 7 Pc#
Next, you will want to connect to your Pwnagotchi from your PC and have it share the computer’s network connection. Image by Chris Miller from Privacy News Online Default configuration values that aren’t explicitly set in this file can be viewed in /etc/pwnagotchi/defaults.yml.
#File buddy 7 install#
During boot, the Pwnagotchi will automatically install this file at /etc/pwnagotchi/config.yml on the Pi and remove it from the SD card boot partition. main: name: 'pwnagotchi' plugins: grid: enabled: true exclude: - 'YourHomeNetworkMaybe' report: true whitelist: - 'YourHomeNetworkMaybe' ui: color: 'black' display: ~ enabled: true type: 'inky'Ĭheck your config with a YAML validator.
The grid plug-in signals the unit’s cryptographic identity and optionally reports a list of pwned networks to the PwnGRID. The following is the example initial configuration for a unit with a Pimoroni Inky pHAT display. In this process, you might define your Pwnagotchi’s name, a network to whitelist, and the type of display you use. This partition should be easily accessible from your computer regardless of your operating system as it is a simple FAT32 partition. For the initial configuration, the easiest way is to create a new config.yml YAML file on the boot partition of the SD card.
0 kommentar(er)
